Phase Field Failure Analysis Report

[zerostep]
  type = RunException
  input = test.i
  cli_args = 'Mesh/ebsd/filename=ebsd3D_zerostep.txt --mesh-only'
  expect_err = 'Error reading header, EBSD data step size is zero.'
  detail = 'if the EBSD data step size is zero,'
[]

[zerosize]
  type = RunException
  input = test.i
  cli_args = 'Mesh/ebsd/filename=ebsd3D_zerosize.txt --mesh-only'
  expect_err = 'Error reading header, EBSD grid size is zero.'
  detail = 'if the EBSD grid size is zero,'
[]

[zerodim]
  type = RunException
  input = test.i
  cli_args = 'Mesh/ebsd/filename=ebsd3D_zerodim.txt --mesh-only'
  expect_err = 'Error reading header, EBSD data is zero dimensional.'
  detail = 'if the EBSD data is zero dimensional,'
[]

[norefine]
  type = RunException
  input = test.i
  cli_args = 'Mesh/ebsd/filename=ebsd3D_norefine.txt Mesh/ebsd/pre_refine=2 --mesh-only'
  expect_err = 'EBSDMeshGenerator error. Requested levels of pre refinement not possible.'
  detail = 'if the requested pre_refine levels are not possible'
[]

[./out_of_range]
  type = 'RunException'
  input = 'testwidth1.i'
  cli_args = 'Materials/CuGrGranisotropic/kappa=10'
  expect_err = 'outside the range 0.098 <= g <= 0.766'
  issues = '#33932'
  design = 'GBWidthAnisotropy.md'
  requirement = 'The anisotropic grain boundary system shall report an error if the grain boundary energies lie outside the range covered by the polynomial fit used to compute the model parameters.'
[../]

[GrandPotentialInterface_out_of_range]
  type = 'RunException'
  input = 'GrandPotentialInterface.i'
  cli_args = "Materials/iface/sigma='0.1 1'"
  expect_err = 'outside the range 0.098 <= g <= 0.766'
  issues = '#33932'
  design = '/GrandPotentialInterface.md'
  requirement = 'The system shall report an error if an interfacial free energy lies outside the range covered by the polynomial fit used to compute the grand potential model interface parameters'
[]

[./seed_error]
  type = 'RunException'
  input = 'integral.i'
  cli_args = 'Kernels/conserved_langevin/seed=1234'
  expect_err = "This parameter has no effect in this kernel. The noise is generated in the user object"

  requirement = "The conserved noise kernel shall error out with a helpful message if a 'seed' parameter is supplied"
[../]

[simple_error]
  type = 'RunException'
  input = 'simple.i'
  expect_err = 'must be on variable types that match the entity mode of the FeatureFloodCounter'
  cli_args = 'AuxVariables/bubble_map0/family=MONOMIAL'
  #max_parallel = 4                     # Only 4 elements
  max_parallel = 1 # See #9886
  issues = '#5077'
  design = 'FeatureFloodCountAux.md'
  requirement = "The feature flood counter aux kernel shall throw an error when acting on a variable that is incompatible with the flood counter mode."
[]

[boundary_intersection_error]
  type = 'RunException'
  expect_err = 'The selected option is only available for elemental aux variables'
  cli_args = 'AuxVariables/v/family=LAGRANGE AuxVariables/v/order=FIRST'
  input = 'boundary_intersection.i'
  issues = '#23246'
  requirement = "The system shall report an error if a nodal variable is specified as the target for the intersection status."
  design = 'FeatureFloodCount.md FeatureFloodCountAux.md'
[]

[test_advanced_op_assignment_bt_error]
  type = 'RunException'
  input = 'grain_tracker_advanced_op.i'
  expect_err = "Unable to find a valid grain to op coloring"
  recover = false # No solve
  cli_args = 'GlobalParams/op_num=4 Outputs/csv=false'

  requirement = "The PolycrystalUserObject base class shall error when a valid coloring cannot be found when using the simple back-tracking algorithm."
  issues = '#7005 #8804'
  design = "PolycrystalICs.md"
[]

[test_advanced_op_assignment_petsc_error]
  type = 'RunException'
  input = 'grain_tracker_advanced_op.i'
  expect_err = "Unable to find a valid grain to op coloring"
  recover = false # No solve
  cli_args = 'UserObjects/voronoi/coloring_algorithm=jp GlobalParams/op_num=6 Outputs/csv=false'

  requirement = "The PolycrystalUserObject base class shall error when a valid coloring cannot be found when using the built-in PETSc based stochastic algorithms."
  issues = '#7005 #8804'
  design = "PolycrystalICs.md"
[]

[BoundingBoxIC]
  type = Exodiff
  input = 'BoundingBoxIC.i'
  exodiff = 'BoundingBoxIC_out.e'
  scale_refine = 1
  valgrind = 'HEAVY'

  detail = 'bounding boxes,'
[]

[RndBoundingBoxIC]
  type = Exodiff
  input = 'RndBoundingBoxIC.i'
  exodiff = 'RndBoundingBoxIC_out.e'
  scale_refine = 1
  valgrind = 'HEAVY'
  max_parallel = 1
  max_threads = 1
  recover = false # See #5207

  detail = 'bounding boxes with random noise,'
[]

[MultiBoundingBoxIC1D]
  type = Exodiff
  input = MultiBoundingBoxIC1D.i
  exodiff = MultiBoundingBoxIC1D_out.e

  detail = 'multiple bounding boxes in 1D,'
[]

[MultiBoundingBoxIC2D]
  type = Exodiff
  input = MultiBoundingBoxIC2D.i
  exodiff = MultiBoundingBoxIC2D_out.e

  detail = 'multiple bounding boxes in 2D, and'
[]

[MultiBoundingBoxIC3D]
  type = Exodiff
  input = MultiBoundingBoxIC3D.i
  exodiff = MultiBoundingBoxIC3D_out.e

  detail = 'multiple bounding boxes in 3D.'
[]

[IsolatedBoundingBoxIC_2D]
  type = Exodiff
  input = 'IsolatedBoundingBoxIC_2D.i'
  exodiff = 'IsolatedBoundingBoxIC_2D_out.e'

  detail = 'Diffused interface can be assigned for isolated bounding boxes in 2D,'
[]

[IsolatedBoundingBoxIC_3D]
  type = Exodiff
  input = 'IsolatedBoundingBoxIC_3D.i'
  exodiff = 'IsolatedBoundingBoxIC_3D_out.e'

  detail = '3D,'
[]

[NestedBoundingBoxIC_2D]
  type = Exodiff
  input = 'NestedBoundingBoxIC_2D.i'
  exodiff = 'NestedBoundingBoxIC_2D_out.e'

  detail = 'nested bounding boxes in 2D, and'
[]

[NestedBoundingBoxIC_3D]
  type = Exodiff
  input = 'NestedBoundingBoxIC_3D.i'
  exodiff = 'NestedBoundingBoxIC_3D_out.e'

  detail = '3D.'
[]

[IsolatedBoundingBoxIC_2D_Overlapping]
  type = RunException
  input = 'IsolatedBoundingBoxIC_2D_Overlapping.i'
  expect_err = 'Partially overlapping boxes are not allowed. Note that this includes the overlapping diffused interfaces. For nested boxes, use NestedBoundingBoxIC.C'

  detail = 'Using IsolatedBoundingBoxIC to create overlapping boxes will throw an error.'
[]